Ask Danny | Ep. 16: Top 5 Simple Solutions for Bathroom Maintenance


This week, Today’s Home-owner Radio Display co-host Joe Truini provides his Prime 5 Uncomplicated Options for the toilet.


“Today’s Homeowner” Simple Solution host Joe Truini sprays Rain-X on his shower door to remove unsightly water spots.
A glass cleaner that includes rain repellant will reduce water places from showing on shower doorways. (3 Echoes Written content Studio)

Water Spot Remover for Shower Doorways

Does your glass shower door have h2o places? They are a agony to take out, and normal cleaners merely simply cannot do the work. Properly, here’s a secret h2o place remover that you may currently have without acknowledging it!

Nobody would like to wipe their shower doorway each and every time just after they use it to stop water places. And let’s be honest — who has the time for that?

Which is why it allows to have the ideal resource for standard maintenance.

I like to use a glass cleaner with a system that incorporates rain repellant — like this one. (This is an affiliate hyperlink. If you invest in this merchandise, we will gain a little commission at no added value to you.)

This kind of product is usually marketed for cleansing bugs and eradicating water spots from vehicle or truck windshields, but that doesn’t indicate it only is effective on these surfaces! So look in the automotive aisle if you can’t locate the products around basic cleaners.

Now, why does this item get the job done around typical domestic cleaners?

It is since the rain-repellant formula triggers h2o to bead up and repel off the shower doorway. That implies your glass shower enclosure will have no h2o places!

Here’s how it will work: Only spray the cleaner on the glass and use a towel to wipe it off — I often use a cotton microfiber towel.

Now you have an uncomplicated water place remover! Not only is the glass thoroughly clean, but it also repels water with no recognizing.

Check out: Straightforward Water Location Remover for Your Shower Doorway


Box of baking soda and bottle of white vinegar, seen beside a bathroom sink
Baking soda and vinegar will deodorize and clear your sink without harmful the bathtub fixture. (3 Echoes Articles Studio)

How to Cleanse and Deodorize Bathtub Sink

It is not usually you deliver baking soda and vinegar into a rest room, but you can use them to cleanse and deodorize a toilet sink.

Sinks typically develop into sluggish-draining, and they can get clogged up with cleaning soap scum and hair. They will also make a rather funky odor, so here’s how to get rid of that.

Commence with 1-3rd cup of baking soda. You never have to be as well specific, but you will want to acquire about a third of a cup or so and dump it in the drain.

Next, take a person comprehensive cup of vinegar. White vinegar is a actually strong cleaning agent that you can use all about the dwelling.

After it hits the baking soda, enable it fizz down for a couple minutes. Some individuals might use bleach in this article, but bleach can truly consume the finish proper off of some bath fixtures, so you never want to use it.

Right after the baking soda and vinegar have calmed down a very little little bit, abide by up with a entire kettle of incredibly hot h2o. This will, in mixture with the vinegar and the baking soda, minimize by everything that may well be clogging up the sink.

If you do this therapy the moment a month, you are going to have a genuinely sweet-smelling sink and a no cost-flowing drain.

Check out: The Uncomplicated Way to Clear and Deodorize Your Sink


inside of a toilet tank showing flapper valve
Flappers have two crucial positions: They offer a seal for the toilet’s flush valve and regulate the volume of drinking water unveiled into the bowl. (3 Echoes Content material Studio)

How to Change a Bathroom Flapper Valve

If you have a rest room which is continually working, the perpetrator is most likely a leaky flapper valve. About time, flapper valves may perhaps develop into cracked or warped, which can allow for water to leak out.

Here’s how to exchange it:

  • Transform the drinking water off to your rest room.
  • Flush the drinking water out so the tank is empty
  • Unhook the outdated flapper valve and snap on the new 1.
  • Modify the chain to make guaranteed the size is suitable.
  • Flip the water again on and flush the toilet a couple of times to make guaranteed the flapper valve is performing thoroughly.

Watch: How to Substitute Toilet Flapper Valve


A selfmade scrub brush drill attachment chucked into a drill is perfect for detailing tile flooring. (3 Echoes Content Studio)

How to Power-Thoroughly clean Tub Tiles

Scrub brushes do the job nicely for cleansing, but they call for a good deal of elbow grease. To change a conventional hand scrub brush into a energy attachment for your drill:

  1. Lower the manage off a spherical scrub brush.
  2. Drill a hole in the middle of the brush.
  3. Insert a 4-inch long equipment bolt in the hole from the bristle facet.
  4. Put a washer and nut on the back again side and tighten it up.
  5. Chuck the bolt into a drill.
  6. Run the drill at medium velocity when applying the scrub brush attachment.

Look at: How to Clear Tiles Speedier Than At any time


Using vinegar to clean a clogged showerhead.
Use vinegar and a plastic bag to clear a clogged showerhead. (3 Echoes Content Studio)

How to Clean a Clogged Showerhead

Showerhead spray nozzles can turn out to be clogged more than time with mineral deposits observed in faucet h2o.

To cleanse a showerhead so it sprays uniformly:

  • Put a plastic bag loaded with white distilled vinegar in excess of the showerhead.
  • Attach a twist tie close to the showerhead arm to hold the bag in put.
  • Let the showerhead to soak in the vinegar for just one to two times.
  • Eliminate the bag and change the showerhead on full pressure.

If the nozzles are even now clogged, repeat the soaking process until eventually obvious.

Watch: How to Thoroughly clean a Clogged Showerhead


Even more Reading

Leave a Reply